How to make Retevis RT80 talk with RT1?

RT80 is digital radio, RT1 is analog radio, how to make them talked?Under same mode(analog), Please keep same frequency and CTCSS/DCS, let us do it

Preparation: install USB driver and software

1.Please download USB driver and RT80, RT1 software from Retevis official website: http://www.retevis.com/resources-center

2.Connect your RT80,RT1 with PC, using programming cable C9018A

3.Turn on the radio

Step 1. Firstly Open RT80 software interface
Choose ‘analog’ mode in channel one, programming TX: 455.62500, RX: 455.62500; TX CTCSS/DCS: 127.3, RX CTCSS/DCS: 127.3

Step 2, opean RT1 software interface, programming same frequency with RT80 in channel one

Retevis RT1

 

 

 

 

 

 

 

 

 

 

Step 3, In the end, All sets need save in RT80 and RT1 software, click ‘write to radio’

When steps 1.2.3 have done, please try to make RT80 talk with RT1, if they can talk, indicate all sets are right, if can’t, please review and check again, if you still don’t understand how to make digital radio talk with analog radio, please contact us by email: vip@retevis.com

Leave a Reply

Your email address will not be published. Required fields are marked *

*