How to set RT43 private call

How to set RT43 private call is the topic today we will discuss. RT43 is UHF(400-480mhz) DMR radio, which has the private call and group call function.

Preparation: install RT43 software

1.Pls download and install USB universal driver and software for RT43 from Retevis official website

https://www.retevis.com/resources-center/

2.Connect your RT43 to the computer, using C9108A programming cable

(Pls note keep RT43 opened)

C9018A: https://www.retevis.com/2-pin-programming-cable-for-retevis-h777

3. Open RT43 software interface

Retevis RT43

How to set RT43 private call

Take RT43( radio ID: 3556325), want to private call HD1(radio ID: 1234) as an example

1. Check the radio ID of RT43 in software

How to set RT43 private call

2.Set the digital individual/private contact in RT43 radio

RT43 private call

The Key point for setting private call:

We must set the call ID to be the radio ID of our private call partner. Such as RT43 would like to private call HD1, we just set Call ID of HD1 (1234)

3.Set communication channel information

Frequency: tx=rx frequency=413.23500

Color code: 1

Slot:1 (if connect to the repeater)
Contact name: call 1

RT43 DMR radio

4. Write to the radio to save all information

5. Programming accordingly in HD1 software

Realize private call in 2 ways:

1.manual dial

Rebooting the radio on ID 1234(HD1)—>

Menu–Contacts—>Manual Dial—>3556352—>Menu—>Call Alert—>Menu to confirm

Then radio ID 3556352(RT43) will receive a private call, then both radios can communicate.

2.call contacts directly

Rebooting the radio on ID 1234(HD1)—>Menu—>band A set—>Menu—>Contacts—>private call—>Menu to confirm

Then radio ID 3556352(RT43) will receive a private call, then both radios can communicate.

After done! Any questions about RT43 private call, please feel free to contact us by email,vip@retevis.com

Leave a Reply

Your email address will not be published. Required fields are marked *

*