How to programme Retevis RT24 to communicate with Retevis RT5R?

How to programme Retevis RT24 to communicate with Retevis RT5R?

Retevis RT24 is a new arrival PMR446 analog radio, because it’s licence-free and elegent design, it’s very popular among European and British users. Do you know how to programme Retevis RT24 to communicate with others radios? Today, let’s take RT24 and Retevis RT 5R as an example, to discuss together the programming in software step by step.

First, let’s programme in RT24 software.

Step:1 Please download and install RT24 USB driver (USB Universal Driver) and RT 24 software in RETEVIS official website http://www.retevis.com/resources-center/

Step 2: You need a programming cable C9018A

Step 3: Connect your RT24 with you PC, using progrogramming cable

Step 4: Turn on the radio RT24.

Step 5: Now we come to RT24 software interface

Step 6: Choose the correct communication port
(computer-device manager )

.Step 7: Click” Read from Radio” in “Program” Column

Step 8: Write the date, such as “RX frequency”, “TX frequency” CTC/DCS DEC and CTC/DCS ENC in to the channels
For example:
RX frequency:462.2375
CTC/DCS DEC: 67
TX frequency 462.2375
CTC/DCS ENC: 67

Finally Step 9:Click “Write to Radio”. Then all date will be save to radio.

Two radio need communicate, the easiest and most common way, is setting both two radios with same frequency and CTCSS.

So second, let’s programme in RT5R software.

Action same steps as RT24, to download and install RT5R software.
Then, in RT5R software, writing same “RX frequency”, “TX frequency” CTC/DCS DEC and CTC/DCS ENC, as RT24

Done! So now RT24 channel 2, can talk with RT 5R channel 1.

Any questions about RT24 programming, please contact kam@retevis.com, we are always here to support!

Leave a Reply

Your email address will not be published. Required fields are marked *

*