RT40 Radio Stun, Activation, Remote Monitor function

RT40 Radio Stun, Activation, Remote Monitor function

1.Signaling launch Settings:
Setting up the Side Button by “Radio Stun“ and “Radio Activation”

2.Setting the digital contact people:
Adding the target radio’s contact ID, and setting the call type as “Private call”

3.Setting the Channel data:
Set up the contact as the Stun radio. Maintain the same frequency and color code as the target radio; If opened the TDMA Direct mode, Slot also should same.

4. Operation:

When the controlling radio is pressed the Key 1, there has the “didi” sound, The indicator light show “Red light”. That mean the “Radio Stun” was launched.

Accused of Radio light show “red light”, No sound. When pressing the PTT to launching, there is a “Didi” warning sound, Can’t be launched. Also can’t reception. Even if changed the Channel, also can’t launching.

When the controlling radio is pressed the Key 1, there has the “didi” sound, The indicator light show “Red light”. That mean the “Radio Activation” was launched.

Accused of Radio light show “red light”, There has “DidaDida” sound and Channel voice broadcast. That mean The radio can normal launching after press the PTT.

 

5.The remote monitoring
Setting the Side button long press as”Remote Monitor”

Setting up the Monitor time:

Note: The Channel should set up”Private call” when using the RT40 Radio Stun, Activation, Remote Monitor function. And the channel which is setted up, then just can used as Stun, Activation, Remote Monitor and Private call. Can’t communicate by PTT.

Leave a Reply

Your email address will not be published. Required fields are marked *

*