Retevis RT29 is high power waterproof long range radio, when you have multiple quantity at hand, do you know how to quick programme multiple RT29?
Retevis RT29 is hot selling model currently, because of advantages below:
- 10W Higher power so long range
- 3200Mah big battery capacity, so long standby time
- IP67 waterproof, so also suitable for outdoor use
- UHF and VHF selection, choose for different scenarios conveniently
Many customers own RT29 because it’s so good performance a radio, they normally order not a few piece together. Some of them may meet a problem, how to quick programme multiple Retevis RT29?
Such as if you have 50pcs radios, after programming the first RT29, if you programme and edit the frequency and othe parameters into the other 49pcs one by one, it will take very long time.
Actually for programme mulitple RT29, there’s a quick way. Today we will introduce this small tip.
How to programme the first RT29?
1.Please download Universal USB driver and RT29 programming software from Retevis official website freely.https://www.retevis.com/resources-center/
2.Open RT29 software.
3.Check the port in your PC device manage.
4.Choose the communication port inside software.
5.Click “read from radio” from “Programe” Column.
6.Programme the frequency and CTCSS/DCS you want to communicate with.
Take note for analog communication, if no need connect to repeater, mostly, we just set all communication channels with SAME frequency and CTCC/DCS. No need programme frequency difference between Receive frequency and Transmit frequency.
7.Finally clicking “write to radio” in the program column
Till now, the first RT29 walkie talkie finished programming.
How to quick programme multiple RT29?
There’re two solutions:
Solution 1: Click Save, to save the first programme walkie talkie to a file.
Pull out the first programmed walkie talkie, plug in the second RT29 walkie talkie, Open “RT29.rdat” file in RT29 software, then click write to radio.
In third walkie talkie, repeating same actions, Open “RT29.rdat” file in RT29 software, then click write to radio.
Till all the radios programme ok.
Solution 2:Pull out the first programmed walkie talkie, plug in the second RT29 walkie talkie, then click” write to radio” directly, second radio programme ok.
Then same actions for the third one, forth one. Then all radios programmed ok. Any other questions about RT29 programming, please feel free to email to email@example.com. Thanks.