How to make RT56 Explosion-proof radio talk with RT47 FRS license-free radio

Make RT56 talk with RT47 radio is possible? RT56 is the Explosion-proof radio, however, RT47 is the FRS FRS license-free radio, Even this, it’s also no problem to make them communicate with each other

 

RT56 Explosion-proof radio

The programming cable is C9018A

https://www.retevis.com/2-pin-programming-cable-for-retevis-h777/

 

RT47 FRS license-free radio

The programming cable is J9137P

https://www.retevis.com/programming-cable-for-retevis-rt87/

 

How to make RT56 talk with RT47 radio

1. Here’s the default frequency of RT47 below,

channelFrequencyCTCSS/DCSpower
1462.5625067.0High
2462.58750118.8High
3462.61250127.3High
4462.63750131.8High
5462.66250136.5High
6462.62500127.3High
7462.72500136.5High
8462.68750141.3High
9462.71250146.2High
10462.55000123.0High
11462.57500D743IHigh
12462.60000D332IHigh
13462.65000D243IHigh
14462.67500D606NHigh
15462.70000D731IHigh
16462.72500D462IHigh

 

2. Setting one default frequency in one of the RT56 radios to keep same frequency and ctcss/dcs as RT47 by RT56 software

A. Have the programming cable c9018A

Make RT56 talk with RT47 radio

 

2.With the radio off, attach the programming cable to the radio and plug the USB end into the PC

RT56 Explosion-proof radio

 

3. Open the Retevis software and turn on the radio.

Click on ReadData(R) to retrieve the settings from the radio and to make changes

Make RT56 talk with RT47 radio

4.To upload software changes to the radio;

Follow the default frequency of RT47 above.
RT47 FRS License-free radio

5.click on WriteData(W), turn off the radio and disconnect the programming cable from the radio

RT47 waterpoof IP67 radio

6. After done, Your radio is now ready to use, now the RT56 can talk with RT47 radio

If you would like to know more on RT47 FRS radio pls check this link:

https://blog.retevis.com/index.php/retevis-rt47-two-way-radio/

Sure, If you have any questions on how to make RT56 talk with RT47 radio, pls feel free to contact me by email, partner@retevis.com

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

*